Thread-On Compensator for MR920/DR920/XR920

$99.99

Thread-On Compensator for MR920/DR920/XR920

5 out of 5 based on 4 customer ratings
(4 customer reviews)

$99.99

In stock

    Description

    ***Due large influx of orders please allow up to 2 weeks to process***

    The NEW Shadow Systems thread on compensator is designed to interface perfectly with our existing MR920, DR920, and XR920 slide designs.

    The compensator will significantly improve shot-to-shot times and lessen felt recoil.

    Our clamping system is rock solid yet avoids the common issue of damage to the threaded section of your barrel.

    The conservatively designed port size ensures reliability with full power ammunition and limits muzzle blast to the sides of the pistol.

    *Note the Geometry of the compensator is design to interface with Shadow Systems MR920/DR920/XR920 Slides, it will make contact and potentially cause damage to MR918 Series and other manufacture slides.*

    Restrictions: By buying this item from Shadow Systems, the Customer certifies that the Customer will comply with any and all requirements imposed by applicable U.S. federal, state, and local laws, regulations, and administrative policies.

    Leave a review

    Review of Thread-On Compensator for MR920/DR920/XR920
    What name should be displayed with your review?
    Please confirm your email to verify your identity. It will not be displayed.
    What title should be displayed with your review?
    The image that should be associated with your review
    A link to a video for this review from an external site (YouTube, Vimeo, etc.).
    Click to add your own review!

    Reviews

    Most recent reviews
    Top reviews
    ProductThread-On Compensator for MR920/DR920/XR920
    54
    554
    Filter
    1 - 5
    5/5
    1

    Roland Deluxe.

    The whole reason I bought the XR920 was to make it into a Roland special, aka a glock 19 with a compensator and red dot. The XR920 has been phenomenal and has the best optic mounting solution I’ve found, just needed the compensator. I tried ZEV and Agency and was disappointed with both, the ZEV would come loose and torque sideways at around 30 degrees and the Agency wouldn’t thread all the way on and the screws would engage the threads. So I finally got the Shadow Systems Compensator and go figure it fits perfectly, lock up solid and PERFORMS! I ran 250 rounds with it today, zero issues and it shoots FLAT, didn’t walk loose or affect accuracy. So in my opinion it’s the best compensator I’ve found and makes my XR920 into a Roland Deluxe.

    5/5
    2

    Great accessory! My MR920 shoots even flatter than before. Has a nice look and feel to the gun would recommend didn’t change anything from Factory!

    5/5
    2

    Great accessory! My MR920 shoots even flatter than before. Has a nice look and feel to the gun would recommend didn’t change anything from Factory!

    5/5
    2

    It looks good on my MR920, shoots great, and I didn’t need to change out the recoil spring shooting federal 115 grain target ammo (ran amazing when I tested defensive loads too). Installation was a breeze as well.

    ProductThread-On Compensator for MR920/DR920/XR920
    54
    554
    Filter
    1 - 5
    5/5
    2

    It looks good on my MR920, shoots great, and I didn’t need to change out the recoil spring shooting federal 115 grain target ammo (ran amazing when I tested defensive loads too). Installation was a breeze as well.

    5/5
    2

    Great accessory! My MR920 shoots even flatter than before. Has a nice look and feel to the gun would recommend didn’t change anything from Factory!

    5/5
    2

    Great accessory! My MR920 shoots even flatter than before. Has a nice look and feel to the gun would recommend didn’t change anything from Factory!

    5/5
    1

    Roland Deluxe.

    The whole reason I bought the XR920 was to make it into a Roland special, aka a glock 19 with a compensator and red dot. The XR920 has been phenomenal and has the best optic mounting solution I’ve found, just needed the compensator. I tried ZEV and Agency and was disappointed with both, the ZEV would come loose and torque sideways at around 30 degrees and the Agency wouldn’t thread all the way on and the screws would engage the threads. So I finally got the Shadow Systems Compensator and go figure it fits perfectly, lock up solid and PERFORMS! I ran 250 rounds with it today, zero issues and it shoots FLAT, didn’t walk loose or affect accuracy. So in my opinion it’s the best compensator I’ve found and makes my XR920 into a Roland Deluxe.