CR Magazine +1 Extension (11-Round)
$14.69
CR Magazine +1 Extension (11-Round)
$14.69
In stock
Description
This magazine extension adds one additional round to the CR920 magazine. Add this to your stock 10-round magazine to take the capacity to 11 rounds.
The basepad is contoured to create a rest for your pinky. In addition to getting an extra round, you will get more control over the pistol.
The +1 basepad is slightly bulkier than the pinky extension. If you are looking for more control, but do not want to add any bulk to the grip, go with the pinky extension.
The assembly goes directly on to your existing 10-round tube and does not reuse any components from other basepads (all the parts you need are included in the assembly).
If you need a replacement locking pin for this basepad, it is the same as the MR/DR/XR Trigger Housing Pin. It can be found HERE
Note: If the locking pin is installed improperly, it is possible to break the pin. When inserting the pin, you must ensure the holes are aligned and that the the pin is pushed or tapped in straight. It is beneficial to install the pin from the right side of the magazine, but it is not a requirement. You should not have to grunt and hit it with a giant rock to put it together.
Restrictions: By buying this item from Shadow Systems, the Customer certifies that the Customer will comply with any and all requirements imposed by applicable U.S. federal, state, and local laws, regulations, and administrative policies.
Leave a review
Reviews
Was unable to load it to 11 rounds, it would fit the 11th round after a struggle and using a loading tool but then wouldn’t seat in the pistol with the slide closed (keep reading).
At this point in time I thought it was still a better option than just the pinky extension because the flat bottom allows for more forceful mag insertion and it realistically doesn’t add any more “presence” to the heel of the gun.
Then it turns out I was missing a step. You also have to remove the thin steel plate from the bottom of the spring during install. This seemingly “as thin as makes no difference” component was apparently “as thick as makes all the difference” as without it I CAN fit 11 rounds without crushing all the bones in my thumb (though its still tight) and I CAN seat the magazine on a closed slide.
Works as intended. Instructions unclear, ______ stuck in magazine, -1 star.
I’m not a fan of flush fit mags. With this, I can get about 20-25% of my pinky on the grip, which is my bare minimum for most guns—but plenty for the soft/flat 920P. It IS crazy tough to get #11 in for the first 4-6 cycles.
NOW we just need a 15-17rd mag for backup and HD. Am I right?
Ordered the “+1” extension. Was kinda worried when I first installed it. Putting that 11th round in there was tough. And getting it seated in the gun was even worse. Could barely rack the slide. But after a few times loading the extra round, seating and cycling the slide, it seams to have worked itself in. Does help greatly having the extra room for the pinky. Would have given it 5 stars if it wasn’t for that initial break in.
Ordered the “+1” extension. Was kinda worried when I first installed it. Putting that 11th round in there was tough. And getting it seated in the gun was even worse. Could barely rack the slide. But after a few times loading the extra round, seating and cycling the slide, it seams to have worked itself in. Does help greatly having the extra room for the pinky. Would have given it 5 stars if it wasn’t for that initial break in.
Was unable to load it to 11 rounds, it would fit the 11th round after a struggle and using a loading tool but then wouldn’t seat in the pistol with the slide closed (keep reading).
At this point in time I thought it was still a better option than just the pinky extension because the flat bottom allows for more forceful mag insertion and it realistically doesn’t add any more “presence” to the heel of the gun.
Then it turns out I was missing a step. You also have to remove the thin steel plate from the bottom of the spring during install. This seemingly “as thin as makes no difference” component was apparently “as thick as makes all the difference” as without it I CAN fit 11 rounds without crushing all the bones in my thumb (though its still tight) and I CAN seat the magazine on a closed slide.
Works as intended. Instructions unclear, ______ stuck in magazine, -1 star.
I’m not a fan of flush fit mags. With this, I can get about 20-25% of my pinky on the grip, which is my bare minimum for most guns—but plenty for the soft/flat 920P. It IS crazy tough to get #11 in for the first 4-6 cycles.
NOW we just need a 15-17rd mag for backup and HD. Am I right?
