Technical Tuesday: Why we machine our firing pins out of solid stainless steel

This week’s Technical Tuesday takes a deeper look into the materials we select for our Firing Pins. The Shadow Systems Firing Pins are different from others you’ll see in the market, because they are machined from solid 17-4 stainless steel.

17-4 stainless steel is considered to be the premium stainless steel in the gun industry, with a nice ability to take heat treat, long-wear resistance, corrosion resistance, and resistance to catastrophic failure.

For a part like a firing pin, the strength of solid stainless steel can prevent breakage and malfunction versus a firing pin that is MIM (metal injection molding), like the Glock factory firing pins. This is not a rant against MIM in general, as we believe there are many applications for which MIM works well for parts, and some of our parts are in fact MIM, however, for a part like a firing pin, we believe the additional strength of billet steel makes for a stronger, longer lasting addition to your pistol.

Today, we are testing the Glock factory MIM Firing Pin against two Shadow Systems 17-4 Stainless Steel Billet Firing Pin to see which is more resistant to failure over time and use.

As always, drop a question in the comments or give us a call at 469.458.6808.

Technical Tuesday: Common Reassembly Issues

This week, we’re taking a look at some common issues that can happen during reassembly. Assembling a Glock is usually very easy, but sometimes there can be simple little issues that can cause reassembly to be a pain.

When your slide is hanging up, the first trick to try is to pull down on the slide lock a little bit, to allow the assembly to slide back on.

The other common issue folks can have is if the recoil assembly is not aligned properly, it can cause the top end to hang up. This is more common with the Glock stamped recoil spring assembly. Make sure the recoil spring is seated properly against the barrel.

Those two tricks can help with any hangups you may run into during reassembly.
Give us a call if you need any help 469.458.6808.